- You are here:
-
Home
-
Products
-
Accessories
-
Prodotti (EN)
- Accessori (EN)
Accessori (EN)
The gas tight housing is a safety tight container which contains inside the MVF20 multivalve for cylindrical tanks.
It is used for mounting angles relative to the floor of the car 90°.
The gas tight housing has a plastic basis specifically dedicated to the MVF20 with two laterally hole of Ø 30mm, usefull for directing outside respect the compartment where the tank possible gas leakages, through the due vent unions.
The gas tight housing CS-20 is equipped with a transparent lid for inspection.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG |
|
VERSION |
CS20 90° |
|
APPLICATION |
CYLINDRICAL TANKS |
|
WORKING PRESSURE |
50 kPa (7.25 PSI) |
|
WORKING TEMPERATURE |
From -20°C to + 65°C |
|
COTTER PIN CLAMP |
L 9 X 270 mm (n°4 pcs) |
|
VENT UNIONS |
Ø 30 mm ( n°2 pezzi ) |
|
INSTALLATION |
Hole Ø 60 mm with 12 indexing |
|
O-RING FOR FERRULE |
Ø 70 X 3,5mm |
|
O-RING FOR COVER |
Ø 130 X 3,5mm |
|
SHUT-OFF VALVE RATED VOLTAGE |
12 V d.c. |
|
FIXING SCREW |
M10 x 1,5 |
|
APPROVAL |
UN ECE 67R.01 |
The multi-valve protection is a plastic container used in the multi-valve MVF20 external, that is, lacking a sealed chamber.
It can be used both in MVF20 toroidal in that the cylindrical ones at any diameter, height and angle.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG |
|
MODEL |
AFMV20 |
|
APPLICATION |
Cilindrical and toroidal tanks |
|
WORKING TEMPERATURE |
From -40°C to + 120°C |
|
FIXING POINT |
Direct joint body of the multivalve |
|
APPROVAL |
ECE 67R.01 |
The filling valve is a device with a non-return valve, which allows the LPG refuelling.
The outside filling valves for installation in the bumper is equipped with only one fixed part equipped with a non-return valve placed inside a double plastic container.
The filling valves are equipped with a DISH adapter, suitable for most of the European countries witch are available on request.
|
TECHNICAL DATA SHEET |
|
|
TYPE OF GAS |
LPG |
|
MODEL |
LPG FILLING VALVE IN BUMPER |
|
MAX WORKING PRESSURE |
30 bar (435 PSI) |
|
TYPE ADAPTER |
DISH (Italian Adapter ) |
|
GAS OUTLET |
M 13x1,5 x Pipe 8mm, brass |
|
WORKING TEMPERATURE |
From -20°C to + 65°C |
|
FIXING SCREW |
M5 x 0,8 mm ( n°2 ) |
|
OVERALL DIMENSION |
Dm. 53 x L 60 mm |
|
APPROVAL |
UN ECE R67 |
The LPG filling valve is a device, fitted with a no return check valve, by which the LPG tank is filled.
The LPG filling valve in petrol hatch consists of a fixed part, fitted with a no return check valve, which can be fastened with two screws to the petrol hatch compartment and a flexible "extension" part.
In case it is not possible to fasten the fixed part directly to the petrol hatch compartment with the two screws supplied, it is possible to use the bracket set.
The LPG filling valve is provided with the Italian DISH adapter, mainly used in the European Union countries. Different type of adapters are available upon request.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG |
|
MODEL |
LPG FILLING VALVE IN PETROL HATCH |
|
MAX WORKING PRESSURE |
30 bar (435 PSI) |
|
TYPE ADAPTER |
DISH (Italian Adapter ) |
|
GAS OUTLET |
M 13x1,5 x tubo 8mm, in ottone |
|
WORKING TEMPERATURE |
Da -20°C a + 65°C |
|
FIXING SCREW |
M5 x 0,8 mm ( n°2 ) |
|
OVERALL DIMENSION |
Ø 53 x L 60 mm |
|
APPLICATION |
ECE R67 |
OPTIONAL
|
ADAPTER ITALY - EU COUNTRIES VERSION M10 |
ADAPTER BAJONET |
FOTO ADATTATORE BAJONET |
|
ADAPTER ACME |
FOTO ADATTATORE ACME |
|
|
KIT MOUNTING BRACKET |
KIT MOUNTING BRACKET IN PETROL HATCH |
FOTO KIT STAFFA PRESA INTERNA SPORTELLO BENZINA |
La presa carica CNG è un dispositivo attraverso il quale si effettua il rifornimento CNG.
La presa carica per vano motore è costituita da una parte fissa che ha la filettatura sul corpo per serrare la stessa tramite il dado e la staffa, in dotazione, direttamente nel vano motore.
È provvista di un ingresso (lato bombole) ed un uscita (lato riduttore) e del tappo di chiusura collegato alla presa stessa.
Le prese carica hanno il doppio attacco Italia – estero valido per i principali paesi della comunità europea.
Sono disponibili su richiesta diversi tipi di adattatori.
|
TECHNICAL DATA SHEET |
|
|
TIPO DI GAS |
CNG |
|
MODELLO |
VANO MOTORE |
|
PRESSIONE DI ESERCIZIO |
260 bar ( max. ) |
|
TIPOLOGIA DI ATTACCO |
Attacco doppio Italia - estero |
|
USCITA GAS |
M 12x1 x tubo 6mm ( n°2 ) |
|
TEMPERATURA DI FUNZIONAMENTO |
Da -40°C a + 65°C |
|
DADO DI SERRAGGIO |
M20 x 1,5 mm |
|
DIMENSIONI |
? |
|
OMOLOGAZIONI |
ECE R67 |