- You are here:
-
Home
-
Popular articles
-
Prodotti (EN)
- Accessori (EN)
Accessori (EN)
- Details
- Category: Accessori (EN)
- Hits: 3415
The LPG solenoid valve EGM-04 is for the upstream fitting when used a reducer without the built-in solenoid valve.
The task of the EGM-04 solenoid valve is to stop the flow of LPG when the engine is switched off or switched to petrol.
It comes in two versions with different gas outlets (2,8 and 4,0 diameter).
The solenoid valve body is made of brass and contains a filter to prevent the dirt coming from the tank.
|
TECHNICAL DATA SHEET |
|
|
TYPE OF GAS |
LPG |
|
MODEL |
EGM - 04 |
|
ENGINE MAXIMUM POWER |
Up to 150 Kw (201 HP) |
|
HOLE (out) SOLENOIDE VALVE |
Ø 4 mm |
|
WORKING PRESSURE |
30 bar ( max. ) |
|
GAS INLET |
M 10x1 x Pipe 6mm, brass |
|
GAS OUTLET |
M 10x1 x Pipe 6mm, brass |
|
WORKING TEMPERATURE |
From -20°C to + 120°C |
|
SHUT-OFF VALVE RATED POWER |
11 W |
|
SHUT-OFF VALVE RATED VOLTAGE |
12 V d.c. |
|
BLOCKING HOLES |
M5 x 0,8 mm ( n°2 ) |
|
OVERALL DIMENSION |
110 x 55 x 50 mm |
|
WEIGHT |
0,4 Kg |
|
APPROVAL |
UN ECE R67 |
- Details
- Category: Accessori (EN)
- Hits: 3279
The CNG solenoid valve is designed for installation directly on CNG reducers without built-in solenoid valves (RI-23 and M96).
The task of the CNG solenoid valve is to stop the flow of CNG when the engine is switched off or switched to petrol.
The solenoid valve body is made of brass (nickel plated) and contains a filter to prevent the dirt coming from the CNG cylinder.
|
TECHNICAL DATA SHEET |
|
|
TYPE OF GAS |
CNG |
|
MODEL |
EVM - 10 |
|
ENGINE MAXIMUM POWER |
Up to 300 Kw |
|
MANOMETER INLET |
Standard |
|
WORKING PRESSURE |
260 bar (3771 PSI) |
|
GAS INLET |
M 12x1 x Pipe ø 6mm |
|
WORKING TEMPERATURE |
From -40°C to + 120°C |
|
SHUT-OFF VALVE RATED POWER |
16 W |
|
SHUT-OFF VALVE RATED VOLTAGE |
12 V d.c. |
- Details
- Category: Accessori (EN)
- Hits: 293
The ECU SGIS-N with OBD control, has three levels of self-learning and an advanced adjusting self-diagnosing system for LPG and CNG sequential systems 2-3-4 ciyinders.
It comes with dedicated wires for connecting the OBD socket of the vehicle for self-learning of the optimum fuel.
The ECU kit is composed of ECU, switch, pressure sensor, map, harness and accessories.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG - CNG |
|
APPLICATION |
For engines up to 4 cylinders |
|
SUPPLY VOLTAGE |
10 – 16 Volts CC |
|
WORKING TEMPERATURE |
From -20°C to + 105°C |
|
MATERIAL |
Aluminium |
|
CONNECTOR |
Double |
|
SYSTEM |
16 bit |
|
INPUT |
Water temperature |
|
Gas temperature |
|
|
Gas pressure |
|
|
Manifold pressure |
|
|
Motor revs |
|
|
Gasoline injection signal |
|
|
Gas - Petrol switching |
|
|
Gas level |
|
|
SELF DIAGNOSIS |
OBD |
|
APPROVAL |
ECE R110 ECE R10 ECE R67 |
Telefonaci al numero +39 055 421 1275
Scrivici via mail bigas@bigas.it
Vieni a trovarciVia Di Le Prata, 62/66