The filter unit gas dedicated for LPG and CNG.
The Bigas aluminium filter equipped with a laminated paper cartrige.
Bigas recommend to replace the gas filter every 15000 Km or 12 months of use. Bigas highlightsthe importance of doing a check-in and service on the above mentioned partyin order to prevent possible malfunctions not connected to the product quality.
The life time of the filter unit is strictly connected to the fuel quality
|
TECHNICAL DATA SHEET |
||
|
GAS TYPE |
LPG - CNG |
|
|
MODEL |
AISG1201000 |
|
|
PRESSURE CLASS |
4,5 Bar LPG
|
0,2 – 4,5 Bar CNG |
|
MAX FLOW RATE |
35 Kg/h LPG |
36 Kg/h CNG |
|
INPUT/OUTPUT GAS CONNECTION |
Ø 11 mm ( X2 ) |
|
|
WORKING TEMPERATURE |
From -40°C to + 120°C |
|
|
OVERALL DIMENSION |
Ø 50 X H 100 mm |
|
|
CLASSIFICATION |
Class 2 |
|
|
APPROVAL |
E20 – 67R-01663 E20-110R-000031 |
|
The kit Rilsan is a device composed by grafting and PVC pipe resistant to high temperatures used to inject the gas (LPG and CNG) as close as possible to the engine head.
It is used precisely in the manifolds where you can not install nozzles common close to the petrol injector (cylinder head).
The package consists of manifold nozzle , PVC pipe, PVC pipe coupling to pipes rubber 6mm Ø int.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG - CNG |
|
APPLICATION |
Sequential system LPG/CNG |
|
OPERATING PRESSURE |
400 Bar ( max ) |
|
WORKING TEMPERATURE |
From -40°C to + 150°C |
|
GRAFT MATERIAL ON MANIFOLD |
Steel |
|
GRAFT THREAD ON MANIFOLD |
|
|
PIPE MATERIAL |
PVC |
|
PIPE LENGHT |
|
|
PIPE DIAMETER |
|
|
GRAFT MATERIAL PVC - PIPE RUBBER |
Brass |
|
DIAMETER MATERIAL PVC - PIPE RUBBER |
|
|
|
|
The mounting bracket for LPG filling valve in petrol hatch uses when is not possible fixed the filling valve directly at the petrol hatch sheet.
The kit is composed of bolts, washers and nuts for the bracket installation.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG |
|
APPLICATION |
All systems LPG |
|
MATERIAL |
Steel |