- You are here:
-
Home
-
Popular articles
-
Prodotti (EN)
- Accessori (EN)
Accessori (EN)
- Details
- Category: Accessori (EN)
- Hits: 259
The ECU Easy Gas mono 8 cylinders has three levels of self-learning and an advanced adjusting self-diagnosing system for LPG and CNG sequential systems 5-6 ciyinders.
It comes with dedicated wires for connecting the OBD socket of the vehicle for self-learning of the optimum fuel.
The ECU kit is composed of ECU, switch, pressure sensor, map, harness and accessories.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG - CNG |
|
APPLICATION |
For engines up to 8 cylinders |
|
SUPPLY VOLTAGE |
10 – 16 Volts CC |
|
WORKING TEMPERATURE |
From -20°C to + 105°C |
|
MATERIAL |
Aluminium |
|
CONNECTOR |
Double |
|
SYSTEM |
64 bit |
|
INPUT |
Water temperature |
|
Gas temperature |
|
|
Gas pressure |
|
|
Manifold pressure |
|
|
Motor revs |
|
|
Gasoline injection signal |
|
|
Gas - Petrol switching |
|
|
Gas level |
|
|
SELF DIAGNOSIS |
OBD |
|
APPROVAL |
ECE R110 ECE R10 ECE R67 |
- Details
- Category: Accessori (EN)
- Hits: 3443
The LPG solenoid valve EGM-04 is for the upstream fitting when used a reducer without the built-in solenoid valve.
The task of the EGM-04 solenoid valve is to stop the LPG flow when the engine is switched off or switched to petrol.
It comes in two versions with different gas outlets (2.8 and 4.0 diameter).
The solenoid valve body is made of brass and contains a filter to prevent the dirt coming from the tank.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
LPG |
|
MODEL |
EGM - 04 |
|
ENGINE MAXIMUM POWER |
Up to 150 Kw |
|
HOLE (out) SOLENOIDE VALVE |
Ø 2,8 mm |
|
WORKING PRESSURE |
30 bar ( max. ) |
|
GAS INLET |
M 10x1 x Pipe 6mm, brass |
|
GAS OUTLET |
M 10x1 x Pipe 6mm, brass |
|
WORKING TEMPERATURE |
From -20°C to + 120°C |
|
SHUT-OFF VALVE RATED POWER |
11 W |
|
SHUT-OFF VALVE RATED VOLTAGE |
12 V d.c. |
|
FIXING SCREW |
M5 x 0,8 mm ( n°2 ) |
|
OVERALL DIMENSION |
110 x 55 x 50 mm |
|
WEIGHT |
0,4 Kg |
|
APPROVAL |
UN ECE R67 |
- Details
- Category: Accessori (EN)
- Hits: 226
The CNG pressure gauge provides a linear electronic signal congruent to the CNG pressure present in the cylinder.
Cylinder indication from empty to full clockwise.
Provided with a cable for the ECU connection and sealing washer.
|
TECHNICAL DATA SHEET |
|
|
GAS TYPE |
CNG |
|
APPLICATION |
Sequential and traditional CNG systems |
|
EXERCISE PRESSURE |
400 Bar ( max ) |
|
WORKING TEMPERATURE |
From -40°C to + 105°C |
|
CONNECTOR |
Directed internally to the body of the pressure gauge |
|
MATERIAL |
Plastic / Brass |
Telefonaci al numero +39 055 421 1275
Scrivici via mail bigas@bigas.it
Vieni a trovarciVia Di Le Prata, 62/66